Sweepster

  • Sweepers 203 204 Series CS

    Sweepers, 203 & 204 Series, CS

    • 6', 7' and 8' wide models with 26" diameter brushes or 8' and 9' wide sweepers with 32" diameter brushes
    • Hydraulic dump feature allows debris disposal at maximum loader lift height
  • Sweepers 205 Series SB Hopper

    Sweepers, 205 Series, SB Hopper

    • Bi-directional broom sweeps forward to pick up dirt, rock and construction debris
    • To dump, lift and tilt; no chains required
    • No front caster wheel; works up to walls, curbs and obstacles along the front edge
    • Replaceable bolt-on cutting edge on bucket
    • Mounts to skid steer quick-attach
    • Available with poly or poly/wire brush
    • Direct-drive brush motor eliminates chains and sprockets
    • CE Certified
  • Sweepers 220 Series QCSS Angle

    Sweepers, 220 Series, QCSS Angle

    • Drive slips out of core without removing hydraulic lines from wheel motor
    • Brush core is reversible for even brush wear
    • 32" diameter brush for longer life
    • Angles manually 30 degrees left/right
    • Faceted hood design provides maximum strength at ends of the hood
    • Choose poly, wire, or poly/wire brush
    • Includes skid steer mounting
  • Sweepers 221 Series LA

    Sweepers, 221 Series, LA

    • 32" bristles extend brush life
    • Drive slips out of core without removing hydraulic lines from wheel motor
    • Brush core is reversible for even brush wear
    • Powered by hydraulic motors mounted inside brush frame
    • Third valve required to operate; fourth valve required to operate optional hydraulic angle change
    • Parallel linkage with casters allow sweeper to follow ground contours
    • Manual angle 30 degrees left/right is standard
    • Choose poly, wire or poly/wire brush
    • Casters standard
  • Sweepers 222 225 Series MRHL

    Sweepers, 222 & 225 Series, MRHL

    • Angles manually 30 degrees left or right; hydraulic angle kit also available
    • Brush drive slips easily out of the core without removing hydraulic lines from the wheel motor
    • Hydraulic motor driven from loader's hydraulic system
    • For vehicles without adequate hydraulic systems, independent hydraulic system is available
  • Sweepers AHCH

    Sweepers, AH/CH

    • Drive slips easily out of core without removing hydraulic lines from wheel motor(s)
    • Brush core is reversible for even brush wear
    • 32" diameter brush for longer life
    • Angles manually 30 degrees left/right
    • Front mount
    • Sweep width for AH is 5' to 7'; CH is 5' to 8'
  • Sweepers CTH

    Sweepers, CTH

    • Angles manually 30 degrees left or right; hydraulic angle kit also available
    • Front PTO required
    • Hydraulic drive
    • Brush widths of 4', 5' and 6' available
    • Uses mower lift
    • Requires 15 to 30 HP
  • Sweepers CTM

    Sweepers, CTM

    • Angles manually 30 degrees left or right; hydraulic angle kit also available
    • Chain drive
    • Front PTO required
    • Uses mower lift
    • Requires 15 to 30 HP
  • Sweepers HR

    Sweepers, HR

    • High raise broom for 40 to 70 HP tractors with quick-change core
    • Angles 40 degrees left/right and front/back adjustment
    • Raises 36" off ground
    • Hydraulic system to power sweeper is standard
    • Optional 180-degree hood, dust suppression system, manual valve handle extension
  • Sweepers HSA

    Sweepers, HSA

    • 36" diameter brush with quick-change core
    • High-speed brush wafers and casters
    • Hydraulically controlled air deflector to direct-swept material
    • Super-duty swing design
    • Linkage follows ground contour
    • 12', 14' and 16' widths with 35-degree max articulation
  • Sweepers MRH

    Sweepers, MRH

    • Angles manually 30 degrees left or right; hydraulic angle kit also available
    • Brush widths of 4', 5' and 6' available
    • Requires 15 to 25 HP
  • Sweepers QCTL Angle

    Sweepers, QCTL Angle

    • Drive slips out of core without removing hydraulic lines from wheel motor
    • Brush core is reversible for even brush wear
    • 32" diameter brush for longer life
    • Angles manually 30 degrees left/right
    • Faceted hood design provides maximum strength at ends of the hood
    • Choose poly, wire, or poly/wire brush
  • Sweepers RHFA

    Sweepers, RHFA

    • Angles manually 30 degrees left or right
    • Driven from rear 540 PTO
    • Includes steel hood, chain shield, height adjustment chains and mounting pins
    • T-Shaft gearbox allows for reversal of brush rotation on mechanical drive
  • Sweepers RLH

    Sweepers, RLH

    • Drive slips easily out of core without removing hydraulic lines from wheel motor
    • Brush core is reversible for even brush wear
    • 32" diameter brush for longer life
    • Angles manually 30 degrees left/right
    • Rear mount
    • Sweep widths 5' to 8'
  • Sweepers RMRM

    Sweepers, RMRM

    • Angles manually 30 degrees left or right
    • Driven from rear 540 PTO
    • Includes steel hood, chain shield, height adjustment chains and mounting pins
    • T-Shaft gearbox allows for reversal of brush rotation on mechanical drive
  • Sweepers Series 203 204 Series VCS

    Sweepers, Series 203 & 204 Series, VCS

    • Vacuum dust suppression system significantly reduces visible dust while sweeping and eliminates the need for water dust suppression systems
    • Includes 26" or 32" diameter brush with quick-change core, casters and parallel arm mounting to follow ground contour
    • Various quick-attach and direct pin-on options available
    • High dump feature allows dumping to the height of the loader lift
  • Sweepers Tow Behind Angle

    Sweepers, Tow-Behind Angle

    • Powered by two orbital hydraulic motors, hydraulic motor driven from engine, hydraulic motor mounted to core, or orbital hydraulic motion, depending on model
    • Manual or hydraulical angles 30 degrees left and right
    • Two-, three- and four-wheel configurations available
  • Sweepers VRS

    Sweepers, VRS

    • Patented "volumizing" feature: bucket holds more debris with less recirculation
    • High dump design holds sweeper head clear of dumping bucket
    • Quick-change brush without breaking hydraulic lines
    • Hydraulic motor can be removed for brush change without tools
  • Sweepers VS

    Sweepers, VS

    • Dust control without messy, bulky or impractical water sprinkler systems
    • Washable PTFE-coated filter works in dry or wet conditions
    • Virtually eliminates airborne particulate ejection during sweeper operation
    • Patented "volumizing" feature: bucket holds more debris with less recirculation
    • High dump design holds sweeper head clear of dumping bucket
    • Quick-change brush without breaking hydraulic lines
    • Hydraulic motor can be removed for brush change without tools
  • Sweepers WLA

    Sweepers, WLA

    • 10' and 12' wide models available
    • 36" diameter brush
    • Dual-motor design for high torque
    • Quick-change brush without breaking hydraulic lines
    • Third valve required to operate; fourth valve required to operate optional hydraulic angle change
    • Parallel linkage allows sweeper to follow ground contours
    • Manual angle 30 degrees left/right is standard
    • Choose poly, wire, or poly/wire brush
  • Sweepers WSP24 Walk Behind

    Sweepers, WSP24 Walk-Behind

    • One forward speed
    • Lightweight; 133 lbs
    • Brush angles easily from handlebars
    • Self-propelled for easy operation
    • Brush casters behind brush in swept path
  • Sweepers WSP36 Walk Behind

    Sweepers, WSP36 Walk-Behind

    The Sweepster WSP36 Walk-Behind Sweeper has infinitely adjustable angling from 20° left and right for variable conditions. Powerful Honda OHV GXV160 engine meets EPA SNRE PH2 2007 and CARB Tier 2 2006 criteria. Differential drive for two-wheel tractors and ease of turning. Complete fill brush for no x-streak sweeping. Solid handlebars with cushioned grip for comfortable operation. This product is also available CE certified.

  • Sweepster CT Angle Broom 226

    Sweepster CT Angle Broom 226

    • 26" diameter brush heads
    • 42", 48" and 60" widths
    • Polypropylene and wire brushes available
    • Options include dirt deflectors and side-mount caster wheels