Exmark STS730GKA60400

Double tap to zoom

 

Features

Operator Position

The large, open platform comfortably positions operators between the drive tires, making them feel integrated into the machine, while also allowing them to get on and off the machine quickly and efficiently.

Height of Cut

The height of cut system was developed for operators to quickly and accurately change the cut height by simply raising and lowering the deck.

Smart Controller

The intuitive Smart Controller reduces downtime with maintenance reminders and on-screen machine health diagnostics along with an enhanced interlock display with both engine and PTO hour displays.

Cut Quality

Available in a variety of deck widths, Staris S-Series features proven Exmark UltraCut Series 4 decks providing unmatched performance and Exmark's legendary quality of cut.

Drive System

The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.

Serviceability

The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.

Specifications

NOTES: N/A in California

Equipment  
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with adjustable front reference bar to modify forward ground speed.
Front Caster Tires 12 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
Drive Tires 23x10.50-12 Carlisle Turf Master
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 15-amp alternator.
Cup Holder NO
Casters .50 thick caster yoke arms with tapered roller bearings
Standard Features Engine Hour Meter
UPC 193308000251
Power Components  
Engine Brand Kawasaki®
Engine Model FX730V
Fuel System Carbureted
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Displacement 726
Engine HP* 23.5*
Air Filter Heavy-duty canister air filtration system
Drive System HYDRO
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 12 cubic inch motors.
Speed Infinitely variable speed selection 0-10.0 mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 10-gallon (37.9-L), dual fuel tanks with dual fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Single point HOC; with mechanical lift-assist spring.
Carb Compliant NO
Fuel Type Gas Carbureted
Engine Spec _S36
*THE GROSS HORSEPOWER OF GASOLINE ENGINES WAS LABORATORY RATED AT 3600 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1940 OR SAE J2723. THE GROSS HORSEPOWER OF THE 3TNV80FT WAS LABORATORY RATED AT 2600 RPM; THE 3TNV88C WAS LABORATORY RATED AT 3000 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1995. AS CONFIGURED TO MEET SAFETY, EMISSION AND OPERATING REQUIREMENTS, THE ACTUAL ENGINE HORSEPOWER ON THESE MOWERS MAY BE SIGNIFICANTLY LOWER.
Decks  
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator's platform.
Blades 3 Blades at 20.50" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions  
Width 72.8 in. (184.9 cm)
Length 70.5" (179.1 cm)
Height 46.7" (118.6cm)
Curb Weight 1045

Accessories and Attachments

ExmarkAccess Noimage

Strobe Light Kit

Strobe Light Kit

 

 

Exmark Micro Mulch System

Micro-Mulch System

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

 

 

ExmarkAccess Noimage

12-Volt Power Port

12-Volt Power Port

 

 

ExmarkAccess Noimage

Hydro Maintenance Kit

Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter

 

 

Exmark 3 Bushel Bagger

3-Bushel Bagger

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models.

 

 

ExmarkAccess Noimage

LED Light Kit

LED Light Kit

 

 

Exmark OperControlDischarge Hand

Operator Controlled Discharge (Hand)

The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

 

 

Exmark Equipment Cover

Equipment Cover

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

 

 

ExmarkAccess Noimage

Trash Container

TRASH CONTAINER

 

 

ExmarkAccess Noimage

Turf Striping Kit

Turf Striping Kit