The FFC Concrete Chuter for skid steer and ag loaders, backhoes and compact wheel loaders is designed for the accurate placement of concrete in tight spaces on job sites where cement trucks can’t go. Never wheelbarrow or pump concrete again!
Concrete Claw
Excellent attachment for removing concrete on sidewalks, driveways or any construction site
End plates and 1.5" tooth shank are made with high-strength T-1 steel
1" x 8" wear-resistant Pacal steel tapered cutting edge
Construction Grapples
Patented design withstands the demands of work in scrap handling, recycling and other tough applications
Includes hardened pins, cushioned cylinder kit and cylinder/hose guard
Construction/Industrial Buckets
83" and 98" models for general purpose work
0.75" x 6" wear-resistant Pacal steel tapered cutting edge
Reversible cutting edge available
FFC SS 4-In-1 Construction Bucket
Ideal for site cleanup, grading, scraping, grappling, dozing and brush removal
Single bevel bolt on dozer edge
Double-bevel, bolt-on clam edges, front and back
Many sizes available
IMPORTANT: Prime movers with tracks and with an operating weight of 7,000 lbs or more MUST have port reliefs installed on the prime mover's main control valve to protect both sides of the auxiliary circuit.
FFC SS Cold Planer Series II
Side shifts 24" left or right to cut next to obstacles
High flow models feature planetary gearbox drive for increased torque and durability
Two sizes available for standard-flow skid steers; six sizes available for high-flow skid steers
FFC SS Side Discharge Bucket
Sand discharge bucket
Removable belt cover to keep weight off belt and reduce stalling
13.5" wide belt with 0.5" tall grouser
Direct hydraulic drive for conveyor
Right or left discharge
Belt driven by cast steel sprockets
Bucket edge drilled for bolt-on edge
No tool adjustment for discharge doors
Sawdust discharge bucket
Material agitator to prevent bridging
Direct hydraulic drive for agitator versus chain and sprocket drive
15" wide belt with 1" tall grouser
FFC SS Snow Blade 114
Hydraulically or manually angles 30 degrees in either direction
Tines increase digging action for grading and separate debris for site cleanup
Scarifies and levels hard-packed soil when grading
Operates in a forward direction
Features a full-floating design to follow compound grades
Heavy-Duty Material Buckets
Three sizes fit a wide range of applications
Wear-resistant Pacal steel tapered cutting edge
IMPORTANT: FFC skid steer buckets have a 70-degree angle on the back; this may increase or decrease the effective rollback and dump angles of your skid steer
Specify skid steer make and model when ordering
Heavy-Duty Utility Buckets
Four sizes fit wide range of loaders
10-gauge, reinforced wrapper
8" bolt-on spill guard available
Large Frame Skid-Steer Buckets
Models for utility and dirt applications
Higher strength and capacity for larger skid steers
Wear-resistant Pacal steel tapered cutting edge
IMPORTANT: FFC skid steer buckets have a 70-degree angle on the back; this may increase or decrease the effective rollback and dump angles of your skid steer
Specify skid steer make and model when ordering
Loader Boom
Ideal for moving trees for transplanting
Use to load and unload attachments, etc.
Ideal for placing and removing concrete forms
Adds 6.5' of reach to your loader
Does not include chains or clevis
Log Grapples
Excellent attachment for handling logs, pipes, brush and other bulky materials
2" x 8" hydraulic cylinder
Closes to 6" log or pipe
Optional 42" and 48" teeth
Manure Forks
Single auxiliary hydraulic circuit
Dual cylinders
Replaceable tines
Single cylinder
Replaceable tines
Manure Push
Ideal for wastewater, manure, feed lots and flood cleanup
Moves large volumes of snow efficiently
Optional pull-back kit draws back snow from buildings, fences and confined areas
Rubber edge 1 ft x 6" on scraper and pull-back
PTO PowerRake - PTO Drive
Pulverizes soil, removes debris, finish-grades and spreads fill or soil
Standard 20-degree hydraulic bi-directional angling
8.6" diameter drum works the soil forward
Wheel arms pivot and store in a vertical position
One bank hydraulic required
Side gear case; spur gears in oil bath; no chains needed
Gear driven and direct drive
Optional hydraulic angle kit for manual angle
Pallet Rail Style Forks
Class IIII Fork Carriages
PowerRake — Direct Drive
Pulverizes soil, removes debris, finish grades, spreads fill or soil, and dethatches
Direct drive motor eliminates chains and sprockets, reducing maintenance
Heavy-duty frame and carbide teeth increase durability
8.6" bi-directional drum works soil forward and backward
Wheel arms pivot and store in a vertical position
Preparator
Efficiently handles cleanup, rock removal and soil preparation
Follows ground contour while picking up rocks and debris
Picks up rocks 1" to 20" in diameter
Bi-directional drum tilts up to 2.5" deep
Scarifier
.75" cutting edge
Rock filtering top grate
Rear facing steel rippers
Optional front comb to smooth out hills
Snow Buckets
Moves large volumes of snow or other loose materials efficiently
Cut-out back plate for better visibility
Quickly attaches to all skid steer with universal hitch
Optional bolt-on edge available
Snow Pushes
All six models feature height of 39.5" and depth of 49.3"
Optional bucket lip mount available for 10', 12' and 14' models
Tillers
Efficiently breaks up sod and clumps of soil, mixes in compost, prepares soil for seeding
Hardened, replaceable tines cut 6" deep
Bi-directional shaft undercuts and top cuts in both directions of travel
Works next to walls, fences and other obstacles
Tree Scoop
Transports and places trees and shrubbery
Digs holes for incoming trees
Efficiently removes tree stumps
Perfect for placing large decorative rocks and stones
0.375" plate with sharp, tapered edge
Utility Brush Grapple
Open floor design
Features patented grapple pins and cushioned cylinders
Available in 60”, 66” and 72” widths
Patented designs withstands the demands of work in scrap handling, recycling and other tough applications
Includes hardened pins, cushioned cylinder kit and cylinder/hose guard
V-Blade Snow Plow
Available in six blade widths
Available with hydraulic sequencing or electro-hydraulic valve for independent blade function
Adjustable blade allows for straight, "V" or scoop positions
Angles up to 30 degrees in both directions
Reversible cutting edge designed with spring-loaded trip mechanism
Blade floats 5 degrees and tilts 5 degrees for ground contour
115 Series Snow Blades
Hydraulically angles 35 degrees in either direction
Replaceable bolt-on wear edge
Optional rubber edge
Skid shoes with adjustable height
Reinforced seven-gauge steel blade
Spring-loaded trip mechanism
136 Series Trip Edge Snow Blades
Hydraulically angles 30 degrees in either direction