Double tap to zoom
Compact design with impressive power allows the R430 to get the work done where larger loaders can't fit. The R430 also delivers big on comfort in every season with an available enclosed cab featuring heat and A/C.
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Comfort and convenience are the keys to operator efficiency. The working station is mounted on rubber ISO mounts to minimize sounds and vibrations. Increase your comfort level in all seasons with an enclosed heated and A/C cooled cab.
The R430 boasts a gross rating of 47.6 HP (SAE J 1995) that provides the extra muscle needed for all of the chores that the loader is capable of performing.
Mud, sand, snow are no problem for the R430's front limited slip axle. If a front wheel slips, the power is transferred to the opposite wheel to restore traction.
As the travel and loading conditions change, the R430's transmission automatically shifts to compensate to provide maximum torque and speed for efficient ground speed operation. The manual switch can be operated with a convenient button located on the loader control level.
The R430 takes versatility to a new level in compact wheel loaders with an optional backhoe attachment. The RBK4009SA backhoe allows the operator to dig a trench up to seven feet deep and 24 inches wide.
The well-balanced cylinder position of the Z link provides strong bucket break out forces and a lift path almost parallel to the ground for superior reach and lift.
Model | R430 |
Type of ROPS /FOPS | CANOPY / CAB |
Engine | |
Model | D1803-CR-TIE4-WL5 |
Emission certification | Tier 4 |
Output (SAE J1995 gross) HP (kW)/rpm | 47.6 (35.5) / 2600 |
Output (SAE J1349 net) HP (kW)/rpm | 44.5 (33.2) / 2600 |
Displacement cu. In (cc) | 111 (1826) |
Transmission | |
Type | Hydrostatic transmission |
Dimensions | |
Overall length ft. in. (mm) | 14' 4" (4355) |
Overall height ft. in. (mm) | 8' 3" (2515) |
Overall width (w/o bucket) ft. in. (mm) | 4' 12" (1520) |
Ground clearance in. (mm) | 11" (280) |
Auxiliary circuit | |
Auxiliary hydraulic flow gpm (£ /min.) | 11.1 (42.1) |
Auxiliary hydraulic pressure psi (mpa) | 2697 (18.6) |
Drive System | |
Tire size | 12.5 / 70-16-8PR |
Travel speed Low / High mph (km/h) | 3.0 (4.8) / 12.4 (20.0) |
Max. traction force | 5485 (24.4) |
Front axle traction lock | Limited slip differential |
Articulation angle deg. | 40 (each direction) |
Angle of rear frame oscillation deg. | ±8 |
Loader clearance circle ft.in. (mm) | 12' 1" (3695) |
Turning radius track circle ft. in. (mm) | 10' 1" (3085) |
Brakes Service Parking |
Enclosed wet disc Spring applied hydrauliC released wet disc |
Lifting specifications | |
Tipping Load (straight) w/ bucket (IS014397-1) Ibs. (kg) w/ pallet forks (IS014397-1) Ibs. (kg) |
5335 (2420) I 5743 (2605) 3494 (1585) I 3770 (1710) |
Tipping Load (full turn) w/ bucket (IS014397-1) Ibs. (kg) w/ pallet forks (IS014397-1) Ibs. (kg) |
4596 (2085) I 4949 (2245) 3009 (1365) I 3251 (1475) |
Rated operating capacity (50% of lipping load) w/ bucket (IS014397-1) Ibs. (kg) w/ pallet forks (IS014397-1/SAEJ1197) Ibs. (kg) |
2298 (1042) I 2474 (1122) 1504 (682) I 1625 (737) |
Operational specifications | |
Standard bucket capacity | 0.5 |
Breakout force lbs. (kN) | 5215 (23.2) |
Lifting capacity at ground level lbs. (kN) | 3687 (16.4) |
Loader raise / lower time sec. | 4.4 / 3.3 |
Fuel tank gal. | 14.3 (54) |
Hydraulic system gal. | 15.3 (58) |
Hydraulic reservoir gal. | 11.1 (42) |
Oprating weight (including operator weight @ 165 lbs.) | 7758 (3519) / 8232 (3734) |