x

Kuhn 4830-640R for sale at Mason Tractor Co. Georgia

Double tap to zoom

Kuhn 4830-640R for sale at Mason Tractor Co. Georgia

 

Features

3-POINT OR PULL-TYPE

3-Point or Pull-Type Configurations

3-Point Hitch

Designed for deep tillage with strength and durability in mind. This Category III, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.

Drawbar Pull-Hitch (Small Frame)

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Equipped with four 280/70 R 15 tires, the drawbar hitch provides excellent field flotation and depth control.

Drawbar Pull-Hitch (Large Frame)

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Four 280/70 R15 tires rear and (2) 280/70 R15 tires on front mounted gauge wheels.

SHANK MOUNTS

Shank Mounts to Match Your Field Conditions

Shear-Bolt

Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern.  Shear-bolt protection guards against shank damage from unexpected obstacles.

  • Shear force: 10,000 pounds (approximate)
  • 16” maximum shank working depth
  • For non-rock conditions

 

Spring Reset

Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.

  • 2,500 pound point load
  • 20” trip height
  • 16” maximum shank working depth
  • 36” underframe clearance

 

PathFind’R™

Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.

  • Basic spring reset design
  • Makes deep ripping possible on contours or terraces
  • Deflects impacts improving performance in rocky soils
  • Smoother steering under full power with tracked tractors
  • Reduces stress on implement frame and 3-point tractor hitch
  • Not compatible with pull-type hitch
  • 20” trip height
  • 16” maximum shank working depth
  • 36” underframe clearance

 

SHANK & POINT OPTIONS

MRD Shanks, Points and Wings (Minimum Residue Disturbance)

Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.

  • 1-1/4” Profile
  • Austempered ductile, reversible wear bar
  • Welded chromium carbide side plates

 

2” Chromium Carbide Point

5” Shattering Wing

  • Residue remaining: 51% to 65%
  • Fracture: 36% to 52%

Low-Disturbance Shank Cap

  • Residue remaining: 51% to 65%
  • Fracture: 31% to 48%

 

¾” Chromium Carbide Point

5” Shattering Wing

  • Residue remaining: 68% to 75%
  • Fracture: 36% to 52%

 Low-Disturbance Shank Cap

  • Residue remaining: 68% to 75%
  • Fracture: 31% to 48%

 

No-Till Shank, Points and Wings

The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers up to 50% operation cost saving versus competitors.

  • ¾” profile
  • High-tensile steel shank
  • Austempered or chromium carbide points, wings and wear bar
  • Chromium carbide side plates
  • Residue remaining: Up to 86%
  • Fracture: 55% to 70%
  • Replaceable wear parts

 

2” Hard Surface Point

  • Best performance for rocky conditions
  • Residue remaining: 51% to 65%
  • Fracture: 31% to 48%

Specifications

Model 4830-640R
Transport Width (ft/m) 18'4" / 5.6
Frame Type 6" x 6" Double Rank Toolbar
Number of Shanks 6
Shank Spacing (in/cm) 40" / 102
Working Width (ft/m) 20' / 6.1
Approximate Weight (lb /kg) 5,302 / 2,404
Approximate Weight (lb/kg) 4,091 / 1,855
STANDARD EQUIPMENT  
Hitch Type Category III 3-Point with Parking Stand
Coulter Blades 22" 1/4" Smooth Coulter Blades, 450 lbs (250 kg) down pressure
Shank Mount Spring Reset: 2500 lb Point Load, 20" Trip Height
Shanks No-Till (Very Low Surface Disturbance), 1/4" Profile Wear Bar Austempered Ductile, Non-Reversible, Chromium Carbide Shank Side Protectors
Points 1-3/4" Austempered Ductile Points, 8" Austempered Wings
Depth Control Ratchet Jack Adjustable Gauge Wheels
Gauge Wheels Two 20.5" x 8", Load Range E
Transport Locks and Safety Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit
OPTIONAL EQUIPMENT  
Hitch Type Drawbar Pull Hitch Includes Four 11L x 15" 8-ply Tires, Duals, One 4-1/4" x 10" and one 4" x 10" Cylinder, Royal Plate Plus® Cylinder Rods, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (less parking stands)
Shank Mount Rigid: Shear Bolt Protected, 10,000 lb (Shear Force)
Shank Mount Pivoting Pathfind'r Spring Reset, 2500 lb
Shanks MRD (Minimum Residue Disturbance) 1-1/4" Reversible Austempered Ductile Wear Bar , Chromium Carbide Shank Side Protectors
Points 2" Chromium Carbide Points
Points 2" Welded Points (MRD Shanks Only) (Recommended for Rocky areas)
Points 3/4" Chromium Carbide Points (MRD Shanks Only)
Shattering Wing 5" Chromium Carbide Shatter Wings (MRD Shanks Only)
Shank Cap Low Disturbance Shank Cap (in lieu of wing)
Closing Wheels (2) 4 x 16" smooth closing wheels, adjustable spring tension (limit shank soil blowout)
Wing Gauge Wheels Two 20.5" x 8", Load Range E
Shank Stagger Kit 6" Offset Between Shanks
OPERATING INFORMATION  
Recommended Operating Speed (mph/km/h) 4 - 7 / 6 - 12
Recommended Working Depth 8" - 16" / 20 - 41 cm
Recommended Tractor Power Range (mph/kw/h) 30 - 40 PTO hp per Shank / 22- 30 kW