x

Kuhn 4830-838F for sale at Mason Tractor Co. Georgia

Double tap to zoom

Kuhn 4830-838F for sale at Mason Tractor Co. Georgia

 

Features

3-POINT OR PULL-TYPE

3-Point or Pull-Type Configurations

3-Point Hitch

Designed for deep tillage with strength and durability in mind. This Category III, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.

Drawbar Pull-Hitch (Small Frame)

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Equipped with four 280/70 R 15 tires, the drawbar hitch provides excellent field flotation and depth control.

Drawbar Pull-Hitch (Large Frame)

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Four 280/70 R15 tires rear and (2) 280/70 R15 tires on front mounted gauge wheels.

SHANK MOUNTS

Shank Mounts to Match Your Field Conditions

Shear-Bolt

Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern.  Shear-bolt protection guards against shank damage from unexpected obstacles.

  • Shear force: 10,000 pounds (approximate)
  • 16” maximum shank working depth
  • For non-rock conditions

 

Spring Reset

Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.

  • 2,500 pound point load
  • 20” trip height
  • 16” maximum shank working depth
  • 36” underframe clearance

 

PathFind’R™

Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.

  • Basic spring reset design
  • Makes deep ripping possible on contours or terraces
  • Deflects impacts improving performance in rocky soils
  • Smoother steering under full power with tracked tractors
  • Reduces stress on implement frame and 3-point tractor hitch
  • Not compatible with pull-type hitch
  • 20” trip height
  • 16” maximum shank working depth
  • 36” underframe clearance

 

SHANK & POINT OPTIONS

MRD Shanks, Points and Wings (Minimum Residue Disturbance)

Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.

  • 1-1/4” Profile
  • Austempered ductile, reversible wear bar
  • Welded chromium carbide side plates

 

2” Chromium Carbide Point

5” Shattering Wing

  • Residue remaining: 51% to 65%
  • Fracture: 36% to 52%

Low-Disturbance Shank Cap

  • Residue remaining: 51% to 65%
  • Fracture: 31% to 48%

 

¾” Chromium Carbide Point

5” Shattering Wing

  • Residue remaining: 68% to 75%
  • Fracture: 36% to 52%

 Low-Disturbance Shank Cap

  • Residue remaining: 68% to 75%
  • Fracture: 31% to 48%

 

No-Till Shank, Points and Wings

The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers up to 50% operation cost saving versus competitors.

  • ¾” profile
  • High-tensile steel shank
  • Austempered or chromium carbide points, wings and wear bar
  • Chromium carbide side plates
  • Residue remaining: Up to 86%
  • Fracture: 55% to 70%
  • Replaceable wear parts

 

2” Hard Surface Point

  • Best performance for rocky conditions
  • Residue remaining: 51% to 65%
  • Fracture: 31% to 48%

Specifications

Model 4830-838F
Transport Width (ft/m) 14'5" / 4.4
Frame Type 6" x 6" Double Rank Toolbar
Number of Shanks 8
Shank Spacing (in/cm) 38" / 97
Working Width (ft/m) 25"4" / 7.7
Approximate Weight (lb /kg) 6,584 / 2 986
Approximate Weight (lb/kg) 4,984 / 2 261
STANDARD EQUIPMENT  
Hitch Type Category III 3-Point with Parking Stand
Coulter Blades 22" 1/4" Smooth Coulter Blades, 450 lbs (250 kg) down pressure
Shank Mount Spring Reset: 2500 lb Point Load, 20" Trip Height
Shanks No-Till (Very Low Surface Disturbance), 1/4" Profile Wear Bar Austempered Ductile, Non-Reversible, Chromium Carbide Shank Side Protectors
Points 1-3/4" Austempered Ductile Points, 8" Austempered Wings
Depth Control Ratchet Jack Adjustable Gauge Wheels
Gauge Wheels Two 20.5" x 8", Load Range E
Transport Locks and Safety Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit
OPTIONAL EQUIPMENT  
Hitch Type Drawbar Pull Hitch with rear lift wheels, Includes Four 11L x 15" 8-ply Tires, Duals, Two 11L x 15" 8 ply front mounted gauge wheels, One 4" x 16" and one 4 1/2" x 16" Cylinder, Royal Plate Plus® Cylinder Rods, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (less parking stands)
Shank Mount Rigid: Shear Bolt Protected, 2,800 lb
Shank Mount Pivoting Pathfind'r Spring Reset, 2500 lb
Shanks MRD (Minimum Residue Disturbance) 1-1/4" Reversible Austempered Ductile Wear Bar , Chromium Carbide Shank Side Protectors
Points 2" Chromium Carbide Points
Points 3/4" Chromium Carbide Points (MRD Shanks Only)
Points 2" Welded Points (MRD Shanks Only)
  (Recommended for Rocky areas)
Shattering Wing 5" Chromium Carbide Shatter Wings (MRD Shanks Only)
Shank Cap Low Disturbance Shank Cap (in lieu of wing)
Closing Wheels (2) 4 x 16" smooth closing wheels, adjustable spring tension (limit shank soil blowout)
Wing Gauge Wheels Two Extra 20.5" x 8", Load Range E
Shank Stagger Kit 6" Offset Between Shanks
OPERATING INFORMATION  
Recommended Operating Speed (mph/km/h) 4 - 7 / 6 - 12
Recommended Working Depth 8" - 16" / 20 - 41 cm
Recommended Tractor Power Range (mph/kw/h) 30 - 40 PTO hp per Shank / 22- 30 kW