- New Products
-
Package Deals & Specials
- Kubota Tractor Package Deals
- KIOTI Tractor Package Deals
- Kubota Construction Package Deals
- Zero-Turn Specials
- Bandit Specials
- DEVELON Specials
- Castle Forklift Specials
- Section 179 Deductions
- Build Your Own Tractor Package
- Build Your Own Mower Package
- Build Your Own Utility Vehicle Package
- Build Your Own Construction Equipment Package
- Used Equipment
- Rentals
- Departments
- Our Company
- Careers
- Kubota Specials
- En Español
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 3 driveline with shear-bolt Option | Shear-bolt offers maximum driveline protection. |
| Cat. 3 driveline with 2-plate slip-clutch Option | Slip-clutch driveline offers convenience for continual work. |
| Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck & side skirt construction | Can withstand more abuse than lighter gauge decks. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Extended cutter front | For increased material flow and added protection. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| Deck Height | 9 11/16" Deck height on 60" and 11" deck height on 72" model Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| Full length skid shoes | Provides sidewall reinforcement and full protection to bottom of sidewall. |
| 1/2" x 3" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 10 Gauge stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| High blade tip speed | Ensures clean cut. |
| 15" Laminated tailwheel | Laminated material is long lasting in rough conditions. Can't go flat. |
| 4" x 16" Solid rubber tailwheel | Can't go flat. |
| 1 1/4" Heavy-duty spindle on tailwheel | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Optional Guarding | Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and back. Rear Metal Band standard on the back. |
| Driveline Holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
| Model Numbers | RCF2060 |
| Machine Weight | 620 lbs (281.2 kg) With laminated tailwheel, slip clutch driveline, Front Rubber Guards and Rear Metal Band. |
| Hitch | Category l with floating top linkage, Quick Hitch ready |
| Cutting Width | 60" (1.52 m) |
| Overall Width | 65" (1.65 m) |
| Overall Length | 98" (2.49 m) |
| Deck Height (Bottom of Deck to Bottom of Skid Shoe) |
9 11/16" (24.6 cm) |
| Cutting Height | 1 1/2" to 12" (3.8 cm to 30.5 cm) |
| Cutting Capacity | 2" (5.1 cm) Diameter |
| Recommended Tractor hp | 20-65 hp (14.9-48.5 kw) |
| Power Take-Off Speed | 540 rpm |
| Gearbox Ratio | 1:1.93 |
| Gearbox Construction | Speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft |
| Gearbox Lubricant | EP 80-90W oil |
| Gearbox oil Capacity | 4.5 Pints (2.13 L) |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Gauge (.134")(3.4 mm) |
| Side Skirt Material Thickness | 10 Gauge (.134")(3.4 mm) |
| Skid Shoes Standard Accessory | Full length weld-on skid shoes 1/4" x 2 1/2" x 18 7/16" (6 mm x 6.4 cm x 46.8 cm) Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes) |
| Stump Jumper | 10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar |
| Blades (2) | 1/2" x 3" x 25" (13 mm x 7.6 cm x 63.5 cm) Heat treated alloy steel free-swinging high lift |
| Blade Bolts | Keyed with harden flat washers & lock nuts. |
| Blade Tip Speed | 16,363 FPM (83.1 mps) |
| Drive-line | ASAE Category 3 |
| Drive-line Protection Optional Optional | Shear-bolt protection 2 Plate slip clutch |
| Tail-wheel Mount | Welded A-arm and caster fork with 360 degree swivel |
| Tail-wheel Optional Optional | 4" x 8" x 15" Laminated tire with cast iron hub 4" x 16" Molded rubber tire |
| Front Guard Optional Optional | Rubber Belting Single Chain Guard |
| Rear Guard Standard Optional Optional | Metal Band Rubber Belting Single Chain Guard |