x

Land Pride RCF2072 for sale at Mason Tractor Co. Georgia

Double tap to zoom

Land Pride RCF2072 for sale at Mason Tractor Co. Georgia

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 3 driveline with shear-bolt Option Shear-bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Option Slip-clutch driveline offers convenience for continual work.
Dual position clevis type 3-Point floating top link Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck & side skirt construction Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
Deck Height 9 11/16" Deck height on 60" and 11" deck height on 72" model Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.
1/2" x 3" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed Ensures clean cut.
15" Laminated tailwheel Laminated material is long lasting in rough conditions. Can't go flat.
4" x 16" Solid rubber tailwheel Can't go flat.
1 1/4" Heavy-duty spindle on tailwheel Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Guarding Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and back. Rear Metal Band standard on the back.
Driveline Holder Keeps driveline up out of dirt. Easier hook up of driveline.

Specifications

Model Numbers RCF2072
Machine Weight 745 lbs (337.9 kg)
With laminated tail-wheel, slip clutch drive-line, Front Rubber Guards
and Rear Metal Band.
Hitch  Category l with floating top linkage, Quick Hitch ready
Cutting Width 72" (1.83 m)
Overall Width 77" (1.96 m)
Overall Length 109 1/2" (2.78 m)
Deck Height (Bottom of Deck to
Bottom of Skid Shoe)
11" (27.9 cm)
Cutting Height 1 1/2" to 12" (3.8 cm to 30.5 cm)
Cutting Capacity 2" (5.1 cm) Diameter
Recommended Tractor hp 20-65 hp (14.9-48.5 kw)
Power Take-Off Speed 540 rpm
Gearbox Ratio 1:1.47
Gearbox Construction Speed-up beveled gears, cast iron housing,
1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft
Gearbox Lubricant EP 80-90W oil
Gearbox oil Capacity 4 Pints (1.89 L)
Deck Construction All welded deck
Deck Material Thickness 10 Gauge (.134")(3.4 mm) 
Side Skirt Material Thickness 10 Gauge (.134")(3.4 mm)
Skid Shoes Standard Accessory Full length weld-on skid shoes
1/4" x 2 1/2" x 18 7/16" (6 mm x 6.4 cm x 46.8 cm) Long bolt-on replaceable skid shoes
(Bolts to weld-on skid shoes)
Stump Jumper 10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar
Blades (2) 1/2" x 3" x 31" (13 mm x 7.6 cm 78.7 cm)
Heat treated alloy steel free-swinging high lift
Blade Bolts Keyed with harden flat washers & lock nuts. 
Blade Tip Speed 14,955 FPM (76.0 mps)
Drive-line ASAE Category 3
Drive-line Protection Optional Optional Shear-bolt protection
2 Plate slip clutch
Tail-wheel Mount Welded A-arm and caster fork with 360 degree swivel
Whitetail Optional Optional 4" x 8" x 15" Laminated tire with cast iron hub
4" x 16" Molded rubber tire
Front Guard Optional Optional Rubber Belting
Single Chain Guard 
Rear Guard Standard Optional Optional Metal Band
Rubber Belting
Single Chain Guard