- New Products
-
Package Deals & Specials
- Kubota Tractor Package Deals
- KIOTI Tractor Package Deals
- Kubota Construction Package Deals
- Zero-Turn Specials
- Bandit Specials
- DEVELON Specials
- Castle Forklift Specials
- Section 179 Deductions
- Build Your Own Tractor Package
- Build Your Own Mower Package
- Build Your Own Utility Vehicle Package
- Build Your Own Construction Equipment Package
- Used Equipment
- Rentals
- Departments
- Our Company
- Careers
- Kubota Specials
- En Español
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures. |
| 5 Year gearbox warranty | A rugged heavy built gearbox capable of handling heavy cutting applications. Shows Land Pride's confidence in gearbox integrity. |
| Cat. 5 driveline with 4-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
| Cat. II and III 3-Point Hitch Options with Quick Hitch Capability | Fits a wide variety of tractors. Quick Hitch provides for fast hook-up. |
| Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Pull-type hitch option | Fits older tractors without a top link and smaller tractors without enough lift capacity. |
| 84" Cutting width | Wide cutting width, reduces cutting time in the field. |
| Heavy deck construction with 3/16" deck top & 1/4" side skirts | Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades. |
| Fully welded deck | Adds additional strength and deck integrity. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 13 3/8" Deck height | Allows cutter to handle heavy cutting conditions. |
| 2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 4". |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Plate stump jumper | Standard round stump jumper slides over stumps, rocks, and debris. |
| High blade tip speed | Ensures clean cut. |
| 4" Dia. cutting capacity | Can aid in clearing brush. |
| Dual laminated tailwheels | Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can't go flat. |
| 1 1/2" Heavy-duty spindle on tailwheel (3-Point cutter) | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Wheel bearings (Pull-type cutter) | Tapered roller bearing in cast iron hub. |
| Optional guarding | Protect against flying debris. |
Specifications
| Model Numbers | RCF3684 3-Point Type | RCF3684 Pull-Type |
| Machine weight | 2,000 lbs. (907.2 kg) With front & rear single chain guards | 2,104 lbs. (954.4 kg) With hydraulic adjustment and front & rear single chain guards |
| Hitch | Category II or III with floating clevis top link, Quick Hitch adaptable |
Pull-type with clevis |
| Pull type tongue weight | N/A | 894 lbs. (405.5 kg) |
| Cutting width | 84" (2.13 m) | |
| Overall width | 90 1/2" (2.30 m) | |
| Overall length | 130" (3.30 m) | 179 1/2" (4.56 m) |
| Deck height (Bottom of deck to bottom of skid shoe) |
13 3/8" (34.0 cm) | |
| Cutting height | 2" - 12" (5.1 cm to 30.5 cm) | |
| Cutting capacity | 4" (10.2 cm) Diameter | |
| Recommended tractor horsepower | 70-190 hp (52.2-141.7 kw) | 50-190 hp (37.3-141.7 kw) |
| Power take-off Speed | 540 rpm | |
| Gearbox | 1:1.21 Speed-up beveled gears, Cast iron housing, 1 3/4" (4.4 cm) - 20 spline input shaft and 2 3/8" (6.0 cm) output shaft |
|
| Gearbox lubricant | 80-90W oil | |
| Gearbox oil capacity | 10 pints (4.73 L) | |
| Deck construction | All welded deck | |
| Deck material thickness | 3/16" (5 mm) | |
| Side skirt material thickness | 1/4" (6 mm) | |
| Skid construction | Replaceable bolt on skid shoes | |
| Stump jumper / blade holder | 3/16" (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar | |
| Blades (2) | 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated alloy steel free-swinging high lift - low friction | |
| Blade bolts | Keyed with harden flat washers & locknuts | |
| Blade tip speed | 14,369 fpm (73.0 mps) | |
| Driveline | ASAE category 5 with 4-plate slip clutch | |
| Driveline protection | 4 plate slip clutch | |
| Transport axle | Cushioned shock absorption | |
| Rear deck height adjustment options | Ratchet jack or hydraulic cylinder | |
| Tailwheel | 4" x 8" x 15" Laminated tire with cast iron hub4" x 8" x 21" Laminated tire with cast iron hub | |
| Front guard | Optional: Rubber belting, single chain guard or double chain guard | |
| Rear Guard | Optional: Single chain guard or double chain guard | |
| Jack Stand | Jack stand on tongue of pull-type cutter | |