x

Land Pride RCGM3712 for sale at Mason Tractor Co. Georgia

Double tap to zoom

Land Pride RCGM3712 for sale at Mason Tractor Co. Georgia

 

Features

Features Benefits
Surpassed rugged industry standards All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
Factory assembled Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
5 Year gearbox warranty Shows confidence in gearbox integrity.
Rugged heavy built gearboxes Capable of handling heavy cutting applications.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
2 Piece driveline shields Driveline grease zerks are easier to access.
Low hitch weight on tractor drawbar Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch Allows for a tighter turning radius.
Adjustable park jack angle Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger Serves as support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline: Cat. 6 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Drivelines with slip-clutches:
Cat. 4 intermediate & Cat. 4 wings
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Zerks on end caps of cross journals Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed Allows clean cutting of material.
6" Blade overlap Eliminates skipping during turns.
3/16" Round stump jumper Standard thick stump jumper material keeps damage to a minimum.
Smooth top design Reduces accumulation of debris and is easier and faster to clean.
Top of decks are 100% welded Makes center decks and wing decks stronger.
1/4" Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoes on wings Reduces gouging the ground when turning.
LED signal lights LED lights are bright, long lasting, and resist vibration; unlike incandescent lights.
Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and
in the hinge area itself.
Wing transport lock pins Transport lock pins will hold wings in folded position in the event of hydraulic failure.
Enclosed dual 1" leveling rods Cutter pulls equally on the rear axle while traveling over rough terrain.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring cushioned center-axle Protects unit from bumps and ground shock.
Replaceable individual wheel spindles Spindles can be replaced when damaged without replacing entire axle assembly.
Wheel options Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting and can’t go flat.
LP Performance hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Maintenance free tongue & axle pivots Self lubricating journal bearings make for less maintenance.
Color coded hydraulic hose handles Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
4 lip purgeable metal backed wheel
hub seal
Seals make it harder for water & debris to enter the hub and grease to leave the hub.
Metal backing prevents sticks and twine from destroying the seal lips.
Greasable cast steel continuous hinge Cast steel hinges make a strong connection & are easy to lubricate.
Galvanized decks on RCG models Durable rust protection for harsh conditions

Specifications

Specifications & Capacities RCGM3712
Horsepower range 50 - 160
Gearbox horsepower 540 rpm or 1000 rpm
160 hp Divider
130 hp Center & Wings
Gearbox lubrication Gear Lube 80-90W EP
Gearbox oil capacity Splitter: 3.5 pints; Center deck & Wings: 6 pints
Cutting capacity 3"
Machine total weight
Drawbar vertical load
3,730 lbs.
1,240 lbs.
Blade tip speed  At 540 rpm
At 1000 rpm
15,500 FPM
15,700 FPM
Hitch types Fixed Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch jack Standard (7,000 lbs.)
Signal lights
7 Pin connector
LED
SAE J560 pin configuration
Cutting width
Overall width
Transport width
12'-0"
12'-10"
9’-4"
Overall length 15'-3" (With center deck raised fully up)
Deck height 11"
Cutting height 1-1/2" - 14"
Lift hydraulics 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics 2 1/2" x 12" hydraulic cylinders, hoses & fittings
Wing transport protection Wing transport lock pins
Deck material thickness 10 Gauge
Side skirt thickness 1/4" Steel
Skid shoes Wing Deck: 1 Replaceable skid shoe per wing
Center Deck: 2 Replaceable skid shoes
Blades - 6 (2 per carrier) 1/2" x 4" Heat-treated, free-swinging alloy steel with uplift
Blade overlap 6"
Blade bolt Keyed with hardened flat washer & locknut
Stump jumper / blade holder 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
Front & rear guards Optional single row chain or dual row chain
Input driveline 540 & 1000 rpm Cat. 6 with constant velocity u-joint with or without overrunning clutch
Intermediate driveline Standard - Category 4 with slip-clutch
Wing drivelines Standard - Category 4 with slip-clutch
Wheel options 21" or 26" Laminated tires,
25.5" New foam filled tires,
25.5" New aircraft tires without foam filling
Number of wheels 4 - Wheel option: Two on transport axle and one on each wing axle
6 - Wheel option: Four on transport axle and one on each wing axle
Transport axle Spring-cushioned on center transport axle
Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Land Pride Performance hitch & Bar-Tite hitch pivot shaft diameter 2 1/4"
A-frame tongue 5" x 3" rectangular tubing