- New Products
-
Package Deals & Specials
- Kubota Tractor Package Deals
- KIOTI Tractor Package Deals
- Kubota Construction Package Deals
- Zero-Turn Specials
- Bandit Specials
- DEVELON Specials
- Castle Forklift Specials
- Section 179 Deductions
- Build Your Own Tractor Package
- Build Your Own Mower Package
- Build Your Own Utility Vehicle Package
- Build Your Own Construction Equipment Package
- Used Equipment
- Rentals
- Departments
- Our Company
- Careers
- Kubota Specials
- En Español
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
| Cat. 3 driveline with shear- bolt | Shear bolt offers maximum driveline protection. |
| Cat. 3 driveline with 2-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
| Floating top link | Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors. |
| Fully welded deck | Robotic welded. Adds additional strength. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| Cutting Height | 1" - 9" cutting height for wide range of cutting conditions. |
| Full length skid shoes | Provides sidewall reinforcement and full protection to bottom of sidewall. |
| 1/2” x 3” Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 10 Gauge stump jumper | Allows cutter to slide over obstructions protecting the gearbox output shaft. |
| High blade tip speed | Ensures clean cut. 42" = 11,459 fpm 48" = 13,090 fpm |
| Laminated tailwheel | Laminated material is long lasting in rough conditions. |
| Solid rubber tailwheel | Can’t go flat. |
| Heavy-duty spindle on tailwheel | Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly. |
| Guarding | Protect against flying debris. Customer can choose to include rubber on the front and rear. |
| Driveline holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
| Model | RDR1548 |
| Implement weight (with front guard) |
424 lbs. |
| Hitch | Category 1 & Category 1 limited, Quick Hitch ready |
| Cutting Width | 47 1/2" |
| Overall Width | 53 1/2" |
| Overall length Iincluding tailwheel) |
91 3/4" |
| Deck height (Bottom of deck to bottom of skid shoe) |
7 1/4" |
| Cutting height | 1 3/4" - 11 1/2" |
| Cutting capacity | 2" (Grass, weeds & light brush) |
| Recommended tractor hp | 20-50 HP |
| Power take-off speed | 540 RPM |
| Gearbox hp rating | 50 HP |
| Gearbox with speed up beveled gears | 540 input rpm gearbox 1:1.93 Cast iron housing |
| Gearbox oil capacity & lubrication | 4.5 Pints of gear lube 80-90w EP |
| Deck construction | One piece reinforced deck |
| Deck material thickness | 12 Gauge |
| Skids shoes | 1/4" X 2" Weld-on |
| Stump jumper | Round pan 10 ga. x 24" |
| Blades (2) | 1/2" x 3" Heat treated alloy steel Free-swinging blades |
| Blade bolts | Keyed with harden flat washer and lock nut |
| Blade tip speed | 13,090 fpm |
| Drive-line | ASAE Category 3 |
| Drive-line protection | Standard 1/2" center shearbolt protection Optional - Center bolt 2 plate slip clutch |
| Tailwheel | 4" x 16" Solid rubber tire |
| Safety guards (Optional) | Rubber (front and rear) |