FEATURES |
BENEFITS |
Surpassed rugged industry standards |
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
5 Year gearbox warranty |
Shows our confidence in the gearbox integrity. |
Cat. 3 driveline with shear-bolt |
Shear-bolt offers maximum driveline protection. |
Cat. 3 driveline with 2-plate slip-clutch |
Slip-clutch driveline offers convenience for continual work. |
Dual position clevis type 3-point floating top link |
Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links. |
Lower clevis type 3-point hitch |
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design. |
Heavy 10 gauge deck construction |
Can withstand more abuse than lighter gauge decks. |
Box tubing deck support |
Makes for a stronger rigid deck |
Fully welded deck |
Robotic welded. Adds additional strength. |
Extended cutter front |
For increased material flow and added protection. |
Round back design |
Helps discharge grass better than enclosed or partially enclosed cutters. |
7 1/4" Deck height on RCR1860 8 7/8" Deck height on RCR1872 |
Allows cutter to handle heavy cutting conditions. |
1 1/2" to 13" RCR1860 Cutting height 1 1/2" to 11 1/2" RCR1872 Cutting height |
Provides for a wide range of cutting conditions. |
Full length skid shoes |
Provides sidewall reinforcement and full protection to bottom of sidewall. |
1/2” x 3” Heat-treated free swinging blades |
Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar hub |
Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
10 Gauge stump jumper |
Standard round stump jumper slides over stumps, rocks and debris. |
High blade tip speed RCR1860 = 16,360 FPM RCR1872 = 14,853 FPM |
Ensures clean cut. |
15”Laminated tailwheel |
Laminated material is long lasting in rough conditions. |
4” x 16” Solid rubber tailwheel |
Can’t go flat. |
Heavy-duty spindle on tailwheel |
Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly. |
Guarding |
Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard. |
Driveline Holder |
Keeps driveline up out of dirt. Easier hook up of driveline. |