Low volume motor @ 11-17 gpm Medium volume motor @ 18-23 gpm High volume motor @ 24-30 gpm |
Customer can chose one of three optional motors (low, medium and high volume) for his SC2560 or SC2572 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer |
Case drain |
Protects gearbox |
1/4" Side panels for overall reinforcement |
Protects sides from debris being thrown against them from the blades. |
Front and rear chain shields |
Single chain on the front and double chain on the rear. Reduces flying debris. |
Replaceable skid shoes (optional) |
Protect side plate structure. Shoes are replaceable for convenience. |
Splined blade bar |
Allows for tight positive fit of stump jumper and blade bar to motor output shaft. |
3/16" Round stump jumper |
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
1/2" x 4" Heat-treated free swinging blades |
Heat-treated blades offer longer life. Free swinging blades protect from obstructions. |
2" Diameter cutting capacity |
Can aid in clearing brush. |
SC2560 High blade tip speed |
Low volume motor = 17,939 fpm at 17 gpm. Medium volume motor = 19,181 fpm at 23 gpm. High volume motor = 19,390 fpm at 30 gpm. |
Offset hitch (8 1/2" to the right) |
Allows the operator to cut close to obstacles on the right side. |
Optional front gauge wheel |
Provides easy operation and handling over uneven terrain, laminated tire can't go flat. |
Polycarbonate door (optional) |
Protects operator from thrown objects. |
Floating hitch mounting plate |
Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator. |
Motor pressure gauge |
Allows the operator to ensure that the motor is operating at proper psi. |
Lift limit safety chain |
Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18". |