- New Products
-
Package Deals & Specials
- Kubota Tractor Package Deals
- KIOTI Tractor Package Deals
- Kubota Construction Package Deals
- Zero-Turn Specials
- Bandit Specials
- DEVELON Specials
- Castle Forklift Specials
- Section 179 Deductions
- Build Your Own Tractor Package
- Build Your Own Mower Package
- Build Your Own Utility Vehicle Package
- Build Your Own Construction Equipment Package
- Used Equipment
- Rentals
- Departments
- Our Company
- Careers
- Kubota Specials
- En Español
Features
| Features | Benefits |
| Low volume motor @ 11-17 gpm Medium volume motor @ 18-23 gpm High volume motor @ 24-30 gpm |
Customer can chose one of three optional motors (low, medium and high volume) for his SC2560 or SC2572 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer |
| Case drain | Protects gearbox |
| 1/4" Side panels for overall reinforcement | Protects sides from debris being thrown against them from the blades. |
| Front and rear chain shields | Single chain on the front and double chain on the rear. Reduces flying debris. |
| Replaceable skid shoes (optional) | Protect side plate structure. Shoes are replaceable for convenience. |
| Splined blade bar | Allows for tight positive fit of stump jumper and blade bar to motor output shaft. |
| 3/16" Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
| 1/2" x 4" Heat-treated free swinging blades | Heat-treated blades offer longer life. Free swinging blades protect from obstructions. |
| 2" Diameter cutting capacity | Can aid in clearing brush. |
| SC2572 High blade tip speed | Low volume motor = 18,225 fpm at 17 gpm. Medium volume motor = 19,487 fpm at 23 gpm. High volume motor = 19,699 fpm at 30 gpm. |
| Offset hitch (8 1/2" to the right) | Allows the operator to cut close to obstacles on the right side. |
| Optional front gauge wheel | Provides easy operation and handling over uneven terrain, laminated tire can't go flat. |
| Polycarbonite door (optional) | Protects operator from thrown objects. |
| Floating hitch mounting plate | Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator. |
| Motor pressure gauge | Allows the operator to ensure that the motor is operating at proper psi. |
| Lift limit safety chain | Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18". |
Specifications
| Model Number | SC2572 |
| Cutter weight without skid shoes, gauge wheel, & protective door | 1098 lbs (498.0 kg) |
| Gauge wheel weight (Optional) | 129 lbs (58.5 kg) |
| Skid shoe weight (Optional) | Standard skid shoes = 10 lbs (4.5 kg) Heavy-duty skid shoes = 21 lbs (9.5 kg) |
| Protective door weight (Optional) | 10 lbs (4.5 kg) |
| Hitch | Universal floating-hitch mounting plate. Hitch plate can be mounted centered on the deck or mounted to offset the deck to the right 8 1/2" (21.6 cm). |
| Cutting width | 72" (1.83 m) |
| Overall width | 78" (1.98 m) |
| Overall length | 91" (2.31 m) |
| Cutting height | 1 1/2" to 18" (3.8 cm to 45.7 cm) infinitely variable. |
| Cutting capacity | 2" (5.1 cm) Diameter |
| Gearbox oil capacity & lubrication | 6 Pints (2.84 L) of EP 80-90 wt. gearlube |
| Spindle hub oil | Does not apply |
| Low volume drive motor | 11-17 gpm (41.6-64.4 lpm) flow |
| Medium volume drive motor | 18-23 gpm (68.1-87.1 lpm) flow |
| High volume drive motor | 24-30 gpm (90.8-113.6 lpm) flow |
| Hydraulic pressure | 1500 to 3500 psi (10.34 to 24.13 MPa) |
| Deck thickness | 10 Ga. (3.4 mm) |
| Side skirt construction | 1/4" (6 mm) Steel |
| Deck wear protection (Optional) | Optional four corner mounted skid shoes. |
| Skid shoes construction (Optional) | Standard-duty skid shoes = 1/4" x 2" (6 mm x 5.1 cm) steel Heavy-duty skid shoes = 3/8" x 3" (1 cm x 7.6 cm) steel |
| Dishpan | Heavy duty round pan stump jumper. |
| Blade size | 1/2" x 4" (1.3 cm x 10.2 cm) updraft. |
| Blade rotation | Clockwise |
| Blade Bolt | 1 1/8"-12 x 3 7/16" with key. |
| 11-17 gpm motor blade tip speed 18-23 gpm motor blade tip speed 24-30 gpm motor blade tip speed |
18,225 fpm (92.6 mps) at 17 gpm (64.4 lpm) 19,487 fpm (99.0 mps) at 23 gpm (87.1 lpm) 19,699 fpm (84.8 mps) at 30 gpm (113.6 lpm) |
| Front deck protection | Single row chain guard. |
| Rear deck protection | Double row chain guard. |
| Deck lift height protection | Safe chain limiter. |
| Cutting height gauging (Optional) | Pivoting and adjustable front mounted gauge wheel with laminated tire. |