Double tap to zoom

 

Features

Q3 CUTTER BAR

The Q3® Cutter Bar is a modular shaft-driven cutter bar that helps to maximize productivity and make the mower more fuel-efficient with minimal gear-to gear interface which can require less horsepower than gear bed style cutter bars. Key features such as the Quick-Clip® Blade Retention System and Quick-Change™ Shear Ring are designed for productivity, functionality and to allow for quick and easy replacement in the field. Access on top of each cutter unit lets the operator check and replace oil quickly.

NITROGEN-CHARGED ACCUMULATOR SUSPENSION SYSTEM

A simple, convenient nitrogen-charged accumulator suspension system makes it easy to adjust for various crops and conditions, and provides better ground following cutter bar balance and a more consistent pitch. The system allows you to establish a setting and charge to that setting every time.

2-POINT QUICK HITCH

A patent-pending, newly designed 2-point Quick Hitch allows for an easy, one-person hook up. It also provides more ground clearance to avoid crop obstructions while in the field. Quick. Simple. Durable.

HYDRAULIC FOLD FOR TRANSPORT

Just because the 10-series trailed mowers offer wide cutting widths, it doesn't mean they have to be a hassle to deal with. The TM1410 hydraulically folds down to a 9 ft (2.7 m) transport width.

OPTIONAL LARGE FLOAT TIRES

Optional 480/45 x 17 large float tires are available for both the TM1210/TM1410 trailed mowers.

TWO INDEPENDENT CUTTER BAR UNITS

Two independent cutter bar units work with the suspension system to allow the mower to flex in uneven ground contour.

Specifications

DIMENSIONS AND WEIGHTS  
Transport Height 76 in
Transport width - standard 9.1 ft
Transport Length 9.8 ft
Cutting Width 25.2 ft
Working Height 76 in
Working Width 23.9 ft
Working Length 19.8 ft
Total Weight 6275 lbs
Tongue Weight 1820 lbs
Suspension Hydraulic
Torque Protection Driveline: friction disc clutch
Tires Standard 31x13.5-15; Optional 480/45x17 flotation tire
TRACTOR REQUIREMENTS  
Tongue/hitch 2-point quick hitch with swivel gearbox, category II or III N
Drive PTO 540 or 1000 rpm
PTO horsepower recommended 95 hp
Hydraulic Type 3 double-acting (2 double-acting with optional kit)
Hydraulic Pressure 1850 psi
Hydraulic flow rate 6 gpm
CUTTER BAR  
Cutter bar type Q3®
Cut height 1 in - 3 in (2.5 cm - 7.6 cm)
Number of Discs 12
Disc Diameter 23 in
Disc Speed 2690 rpm
Number of Blades 24
Angle Adjustment Hydraulic pitch control
Quick Clip® blade retention system Standard
Curtain material 1400 g/m2 polyester woven material with flexible PVC covering
3-year limited cutter bar warranty Standard
FEATURES  
Optional swath formation Optional swathwheel
Skid Shoes Standard modular independent skid shoes; Optional topping wear skids
Highway Lights Standard